Stock Category
|
Radial insert ball bearings are based on sealed deep groove ball bearings, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.
These bearings are available singly or as units, consist of a housing, bearing and seal that is preassembled and greased. These ready-to-mount units can accommodate moderate initial misalignment, but normally do not enable axial displacement of the shaft.
These bearings and units provide a simple, cost-effective solution that can provide a number of benefits.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| G1215-KRR-B-AS2/V | 74.6125 | 130 | 67 | 2.644 | 74.6125×130×67INA |
| GNE30-KRR-B | 30 | 72 | 50.2 | 0.63 | 30×72×50.2INA |
| GNE35-KRR-B | 35 | 80 | 51.6 | 0.74 | 35×80×51.6INA |
| GNE40-KRR-B | 40 | 90 | 54.6 | 1.02 | 40×90×54.6INA |
| GNE50-KRR-B | 50 | 110 | 66.75 | 1.82 | 50×110×66.75INA |
| GNE60-KRR-B | 60 | 130 | 68 | 2.97 | 60×130×68INA |
| GNE70-KRR-B | 70 | 150 | 75.5 | 3.81 | 70×150×75.5INA |
| GNE80-KRR-B | 80 | 170 | 93.6 | 7.1 | 80×170×93.6INA |
| GNE90-KRR-B | 90 | 190 | 101 | 8.07 | 90×190×101INA |
| GNE100-KRR-B | 100 | 215 | 109.4 | 11.41 | 100×215×109.4INA |
| GE25-KRR-B-2C | 25 | 52 | 44.5 | 0.26 | 25×52×44.5INA |
| GE30-KRR-B-2C | 30 | 62 | 48.5 | 0.41 | 30×62×48.5INA |
| GE35-KRR-B-2C | 35 | 72 | 51.3 | 0.58 | 35×72×51.3INA |
| GE40-KRR-B-2C | 40 | 80 | 56.5 | 0.78 | 40×80×56.5INA |
| GE20-KTT-B | 20 | 47 | 43.7 | 0.19 | 20×47×43.7INA |
| GE25-KTT-B | 25 | 52 | 44.5 | 0.24 | 25×52×44.5INA |
| GE30-KTT-B | 30 | 62 | 48.5 | 0.38 | 30×62×48.5INA |
| GE35-KTT-B | 35 | 72 | 51.3 | 0.56 | 35×72×51.3INA |
| GE40-KTT-B | 40 | 80 | 56.5 | 0.75 | 40×80×56.5INA |
| GE45-KTT-B | 45 | 85 | 56.5 | 0.83 | 45×85×56.5INA |
| GE50-KTT-B | 50 | 90 | 62.8 | 0.98 | 50×90×62.8INA |
| GE55-KTT-B | 55 | 100 | 71.4 | 1.37 | 55×100×71.4INA |
| GE60-KTT-B | 60 | 110 | 77.9 | 1.8 | 60×110×77.9INA |
| GE65-214-KTT-B | 65 | 125 | 66 | 2.71 | 65×125×66INA |
| GE70-KTT-B | 70 | 125 | 66 | 2.15 | 70×125×66INA |
| GE75-KTT-B | 75 | 130 | 67 | 2.14 | 75×130×67INA |
| GE80-KTT-B | 80 | 140 | 70.7 | 2.79 | 80×140×70.7INA |
| GE20-KLL-B | 20 | 47 | 43.7 | 0.2 | 20×47×43.7INA |
| GE25-KLL-B | 25 | 52 | 44.5 | 0.12 | 25×52×44.5INA |
| GE30-KLL-B | 30 | 62 | 48.5 | 0.39 | 30×62×48.5INA |