Stock Category
|
Radial insert ball bearings are based on sealed deep groove ball bearings, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.
These bearings are available singly or as units, consist of a housing, bearing and seal that is preassembled and greased. These ready-to-mount units can accommodate moderate initial misalignment, but normally do not enable axial displacement of the shaft.
These bearings and units provide a simple, cost-effective solution that can provide a number of benefits.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| GE30-KRR-B-FA164 | 30 | 62 | 48.5 | 0.39 | 30×62×48.5INA |
| GE35-KRR-B-FA164 | 35 | 72 | 51.3 | 0.55 | 35×72×51.3INA |
| GE40-KRR-B-FA164 | 40 | 80 | 56.5 | 0.75 | 40×80×56.5INA |
| GE50-KRR-B-FA164 | 50 | 90 | 62.8 | 0.99 | 50×90×62.8INA |
| GE60-KRR-B-FA164 | 60 | 110 | 77.9 | 1.84 | 60×110×77.9INA |
| GE65-214-KRR-B-FA164 | 65 | 125 | 66 | 2.71 | 65×125×66INA |
| GE70-KRR-B-FA164 | 70 | 125 | 66 | 2.15 | 70×125×66INA |
| GE75-KRR-B-FA164 | 75 | 130 | 67 | 2.65 | 75×130×67INA |
| GE80-KRR-B-AH01-FA164 | 80 | 140 | 70.7 | 2.95 | 80×140×70.7INA |
| GE90-KRR-B-FA164 | 90 | 160 | 69.5 | 3.68 | 90×160×69.5INA |
| G1008-KRR-B-AS2/V | 12.7 | 40 | 37.4 | 0.1497 | 12.7×40×37.4INA |
| G1010-KRR-B-AS2/V | 15.875 | 40 | 37.4 | 0.1315 | 15.875×40×37.4INA |
| G1012-KRR-B-AS2/V | 19.05 | 40 | 43.7 | 0.2087 | 19.05×40×43.7INA |
| G1014-KRR-B-AS2/V | 22.225 | 52 | 44.5 | 0.2585 | 22.225×52×44.5INA |
| G1015-KRR-B-AS2/V | 23.8125 | 52 | 44.5 | 0.2495 | 23.8125×52×44.5INA |
| G1100-KRR-B-AS2/V | 25.4 | 52 | 44.5 | 0.2495 | 25.4×52×44.5INA |
| G1102-KRR-B-AS2/V | 28.575 | 62 | 48.5 | 0.381 | 28.575×62×48.5INA |
| G1103-KRR-B-AS2/V | 30.163 | 62 | 48.5 | 0.381 | 30.163×62×48.5INA |
| G1104-206-KRR-B-AS2/V | 31.75 | 62 | 48.5 | 0.381 | 31.75×62×48.5INA |
| G1104-KRR-B-AS2/V | 31.75 | 72 | 51.3 | 0.5488 | 31.75×72×51.3INA |
| G1106-KRR-B-AS2/V | 34.925 | 72 | 51.3 | 0.5488 | 34.925×72×51.3INA |
| G1107-KRR-B-AS2/V | 36.5125 | 72 | 51.3 | 0.5488 | 36.5125×72×51.3INA |
| G1108-KRR-B-AS2/V | 38.1 | 80 | 56.5 | 0.7983 | 38.1×80×56.5INA |
| G1110-KRR-B-AS2/V | 41.275 | 85 | 56.5 | 0.8074 | 41.275×85×56.5INA |
| G1111-KRR-B-AS2/V | 42.8625 | 85 | 56.5 | 0.8074 | 42.8625×85×56.5INA |
| G1112-KRR-B-AS2/V | 44.45 | 85 | 56.5 | 0.8074 | 44.45×85×56.5INA |
| G1115-KRR-B-AS2/V | 49.2125 | 90 | 62.8 | 0.9979 | 49.2125×90×62.8INA |
| G1200-KRR-B-AS2/V | 50.8 | 100 | 71.4 | 1.415 | 50.8×100×71.4INA |
| G1203-KRR-B-AS2/V | 55.5625 | 100 | 71.4 | 1.415 | 55.5625×100×71.4INA |
| G1207-KRR-B-AS2/V | 61.9125 | 110 | 77.9 | 1.837 | 61.9125×110×77.9INA |