Stock Category
|
Radial insert ball bearings are based on sealed deep groove ball bearings, but have a convex outer ring and in most cases an extended inner ring with a certain locking device enabling quick and easy mounting onto the shaft.
These bearings are available singly or as units, consist of a housing, bearing and seal that is preassembled and greased. These ready-to-mount units can accommodate moderate initial misalignment, but normally do not enable axial displacement of the shaft.
These bearings and units provide a simple, cost-effective solution that can provide a number of benefits.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| CRB30/83 | 30 | 83.6 | 40.7 | 0.41 | 30×83.6×40.7INA |
| CRB30/92 | 30 | 93 | 40.7 | 0.41 | 30×93×40.7INA |
| CRB35/110 | 35 | 112.3 | 44.4 | 0.56 | 35×112.3×44.4INA |
| RABRB12/47-FA106 | 12 | 47.3 | 30.9 | 0.15 | 12×47.3×30.9INA |
| RABRB15/47-FA106 | 15 | 47.3 | 31.1 | 0.15 | 15×47.3×31.1INA |
| RABRB20/52-FA106 | 20 | 52.3 | 32.3 | 0.2 | 20×52.3×32.3INA |
| RABRB25/62-FA106 | 25 | 62.2 | 33.9 | 0.24 | 25×62.2×33.9INA |
| RABRA30/62-FA106 | 30 | 62.2 | 30.4 | 0.3 | 30×62.2×30.4INA |
| RABRB30/72-FA106 | 30 | 72.2 | 38.2 | 0.38 | 30×72.2×38.2INA |
| RABRB35/80-FA106 | 35 | 80.2 | 41.4 | 0.57 | 35×80.2×41.4INA |
| RABRB40/85-FA106 | 40 | 85 | 46.3 | 0.73 | 40×85×46.3INA |
| RABRB50/100-FA106 | 50 | 100.2 | 47.7 | 0.92 | 50×100.2×47.7INA |
| RCRA20/46-FA106 | 20 | 46 | 24.5 | 0.14 | 20×46×24.5INA |
| RCRB25/57-FA106 | 25 | 57.3 | 31 | 0.21 | 25×57.3×31INA |
| RCSMB15/65-FA106 | 15 | 65.1 | 28.6 | 0.18 | 15×65.1×28.6INA |
| RCSMB17/65-FA106 | 17 | 65.1 | 28.6 | 0.18 | 17×65.1×28.6INA |
| RCSMB20/65-FA106 | 20 | 65.1 | 31 | 0.22 | 20×65.1×31INA |
| RCSMB25/65-FA106 | 25 | 65.1 | 31 | 0.24 | 25×65.1×31INA |
| RCSMA30/65-FA106 | 30 | 65.1 | 26.5 | 0.32 | 30×65.1×26.5INA |
| PE20 | 20 | 55 | 31.5 | 0.24 | 20×55×31.5INA |
| PE25 | 25 | 62 | 32 | 0.31 | 25×62×32INA |
| PE30 | 30 | 72 | 37.2 | 0.48 | 30×72×37.2INA |
| PE35 | 35 | 80 | 40 | 0.64 | 35×80×40INA |
| PE40 | 40 | 90 | 45.2 | 0.88 | 40×90×45.2INA |
| BE20 | 20 | 55 | 16 | 0.19 | 20×55×16INA |
| BE25 | 25 | 62 | 17 | 0.15 | 25×62×17INA |
| BE30 | 30 | 72 | 21 | 0.37 | 30×72×21INA |
| BE35 | 35 | 80 | 21 | 0.45 | 35×80×21INA |
| BE40 | 40 | 90 | 25 | 0.63 | 40×90×25INA |