Stock Category
|
Self-aligning ball bearings have two rows of balls and a common sphered raceway in the outer ring. The bearings are insensitive to angular misalignment of the shaft relative to the housing.
Self-aligning ball bearings generate less friction than any other type of rolling bearing, which enables them to run cooler even at high speeds.
|
| designation | Principal dimensions | weight | brand | ||
|---|---|---|---|---|---|
| d | D | B | w | ||
| _ | mm | kg | _ | ||
| 2218 K + H 318 | 80 | 160 | 40 | 5.5 | 80×160×40 |
| 1218 K + H 218 | 80 | 160 | 30 | 3.5 | 80×160×30 |
| 2318 KM + H 2318 | 80 | 190 | 64 | 9.8 | 80×190×64 |
| 1318 K + H 318 | 80 | 190 | 43 | 6.9 | 80×190×43 |
| 1216-K-TVH-C3 | 80 | 140 | 26 | 1.62 | 80×140×26FAG |
| 1216-TVH | 80 | 140 | 26 | 1.65 | 80×140×26FAG |
| 2216-K-TVH-C3 | 80 | 140 | 33 | 1.97 | 80×140×33FAG |
| 2216-TVH | 80 | 140 | 33 | 2.01 | 80×140×33FAG |
| 1218-K-TVH-C3 + H218 | 80 | 160 | 30 | 3.69 | 80×160×30FAG |
| 2218-K-TVH-C3 + H318 | 80 | 160 | 40 | 4.57 | 80×160×40FAG |
| 1316-K-M-C3 | 80 | 170 | 39 | 4.5 | 80×170×39FAG |
| 1316-M | 80 | 170 | 39 | 4.56 | 80×170×39FAG |
| 2316-K-M-C3 | 80 | 170 | 58 | 6.18 | 80×170×58FAG |
| 2316-M | 80 | 170 | 58 | 6.31 | 80×170×58FAG |
| 1318-K-M-C3 + H318 | 80 | 190 | 43 | 7.66 | 80×190×43FAG |
| 2318-K-M-C3 + H2318 | 80 | 190 | 64 | 10.31 | 80×190×64FAG |
| 1216 | 80 | 140 | 26 | 1.6 | 80×140×26 |
| 1216K | 80 | 140 | 26 | 1.59 | 80×140×26 |
| 1216ATN | 80 | 140 | 26 | 0 | 80×140×26 |
| 1216AKTN | 80 | 140 | 26 | 0 | 80×140×26 |
| 2216 | 80 | 140 | 33 | 2.19 | 80×140×33 |
| 2216K | 80 | 140 | 33 | 2 | 80×140×33 |
| 2216ATN | 80 | 140 | 33 | 0 | 80×140×33 |
| 2216AKTN | 80 | 140 | 33 | 0 | 80×140×33 |
| 1316 | 80 | 170 | 39 | 4.19 | 80×170×39 |
| 1316K | 80 | 170 | 39 | 4.19 | 80×170×39 |
| 1316ATN | 80 | 170 | 39 | 0 | 80×170×39 |
| 1316AKTN | 80 | 170 | 39 | 0 | 80×170×39 |
| 2316 | 80 | 170 | 58 | 5.7 | 80×170×58 |
| 2316K | 80 | 170 | 58 | 5.55 | 80×170×58 |